2. CONTROLS 2.12 QUICK - TACH Push the locking lever (1) fully down (Fig. 2.12D) extending the lock pins (Fig. 2.12E item 2) through the attachment and securing the attachment. The quick - tach, which is standard equipment, allows changing from one attachment to another quickly without having to remove bolt or pins. Before operating the attachment check that the locking pins are correctly engaged. To operate, lift the locking lever (1) up to completely retract the locking pins (2) (Fig.2.12A). Tilt the quick - tach frame forward (Fig. 2.12B) with the bucket tilt cylinders and drive into the attachment. Retract the bucket tilt cylinders (Fig.
2.12C) which will line up the bottom of the attachment with the quick - tach lock pins. Shut off the engine. After hooking up the attachment, check to be sure pins and locking levers are correctly engaged. WARNING 1 1 1 1 1 1 2 2 C3967 Fig. 2.12A C3964 Fig. 2.12B C3965 Fig. 2.12C 1 1 1 1 2 2 C3966 Fig. 2.12D C3968 Fig. 2.12E 19