1. The cooling can be adjusted as desired. To turn on, push the "A/C" button in, and to turn off, push the button in once more. 2. To adjust cooling as desired adjust the temperature lever 2 and also turn the fan blower switch 4 to the desired position. 3. To cool the interior quickly, set the air source select lever 3 as shown in the figure and turn the fan blower 4 switch to the "4" position. Cooling control (on models with air conditioner): OPT Power ventilator (on models with and without heater): The fan blower 2 switch can be in any position except "OFF". Set the air source lever 1 as shown in this figure. Fresh air will then be drawn in from outside the vehicle.
- 2–52 - CONTROLS AND INSTRUMENTS Set the temperature lever 1 as shown in the figure and slide the fan blower switch 2 on. When you want to warm up quickly, set the air source select lever 3 as shown in the figure and slide the fan blower switch to the "4" position. Windshield is often misted up when the air source select lever 3 is set as shown. To demist, slide the lever 3 to the far right. NOTE Heating: