I IANOSJP I Ml·1 POWER TRAIN DRIVE V-BELT ~ --------------------------------------------------------- V-belt Width CD Quantity of Spacer A 35 mm (1.38 in) or more 2 spacers B 34 mm (1.34 in) 1 spacer C 33 mm (1.30 in) No spacer ~I 32 mm (1.25 in) or less Replace the V-belt ~" 1.Remove: • Side cowling (left) (See page 2-3) • Bolt (drive V-belt guard) CD • Drive V-belt guard @ NOTE: ______________________ __ Press the holding pin @ all the way in until it releases from the hook @ , then rotate it 90· and pull it out. 2. Remove: • Drive V-belt CD Removal steps: • Rotate the secondary sliding sheave clock- wise @and push@ it so that it separates from the fixed sheave .
• Pull @ the belt up over the secondary fixed sheave . • Remove the belt from the secondary sheave and primary sheave. 2-16 http://ReadManuals.com