OPERATOR'S STATION Armrest Adjustment Armrest (5) can be pulled upright by hand to get on and off the machine easily. The angle of armrest (5) can be adjusted to the desired posi- tion by turning adjusting dial (6) located on the bottom of armrest (5). 5 6 M1G6-01-017 SEAT WITH A BUILT-IN HEATER Armrest Raise the armrest, the heater installed inside the seat acti- vates by operating seat heater switch (8) on the optional equipment control switch panel. When seat heater switch (8) is turned ON, the seat surface is heated so that the seat section becomes warm. When the temperature of the seat section is raised to the specified temperature, heating is automatically stopped. NOTE:
Depending on what kinds of optional equipments are installed, the switch button function may differ. Use the switch only after confirming the kinds of the installed optional equipment. 8 M1J1-03-001 8 M1U1-01-011 1-88