Ignition System/Ignition Coil REPLACE IGNITION COIL—P218G AND P220G ENGINES 1. Remove air cleaner assembly. (See Remove Air Cleaner in Group 05 in this manual.) 2. Disconnect wire leads (A—F). M46015 -UN-08JAN90 3. Remove two cap screws to remove ignition coil. 4. Install ignition coil and two cap screws. 5. Connect wire leads and install air cleaner assembly. (See Install Air Cleaner in Group 05 in this manual.) A—Spark Plug Wire B—Spark Plug Wire C—Condenser Wire D—Wiring Harness (Key Switch) E—Orange Wire (Ignition Coil) F—Black Wire (Ignition Coil) M98,2065K,6 -19-11FEB87 REPLACE IGNITION MODULE AND MAGNETIC RING—P218G AND P220G ENGINES 1. Remove air cleaner assembly.
(See Group 05 in this manual.) M46016 -UN-08JAN90 2. Remove flywheel. (See Group 20 in this manual.) 3. Remove three cap screws. Gently pull stator (A) off mounting posts. M98,2065K,7 -19-11FEB87 65 3 CTM2 (19APR90) 65-3 16, 18, 20 & 24HP Onan Engines AllTractorManuals.com 130495