Operation—Operator's Station Removing and Storing the Lower Front Window NOTE: Upper front window must be raised before lower front window can be removed. 1. While pulling in on window, raise window to remove. T136266 —UN—18DEC00 TX14740,0001C97 -19-28JUN06-1/2 2. Store window in rear-left storage area of cab. Install in protectors as shown. NOTE: In cold weather some operators may choose to work with the top glass open and the bottom glass in place. This provides excellent visibility and tends to hold the heat being circulated around the operator’s feet. 1— Protector 2— Protector T136267 —UN—18DEC00 TX14740,0001C97 -19-28JUN06-2/2 Opening Side Windows CAUTION:
Avoid serious crushing injury from boom. Never place any part of body beyond window bar or frame. It could be crushed by the boom if boom control lever is accidentally bumped or otherwise engaged. T136268 —UN—18DEC00 DO NOT remove window bars. If window or bars are missing or broken, replace immediately. Both right side window and cab door window can be opened. 1. Right-rear side window: Unlock the latch (1). Push joint part of latch to open window. 2. Cab door window: Slide front pane to the rear and rear pane to the front. 1— Latch TX14740,0001C98 -19-08JAN01-1/1 2-1-10 060313 PN=38