DRIVING 19. DRIVING ver of the work hydraulic system to position ‘2’. 3 - Raise the work unit to its transport position. If the work unit is in transport position, the two red arrows of the transport position marking on the lifting cylinder are next to each oth- er. 4 - Press down the brake pedal and hold it in this position. 75_152 5 - Release the parking brake. Press the celebration adjust- ment knob to this at the parking brake lever. Press down the locking button of the parking brake lever. Then, release the locking button. The parking brake warning light goes out. pedal at the same time in order to start the machine. 84 1 2 75 019 _ 2 75 019 75 023 _