2016 Isuzu Truck Rear Wheel Axle The design and installation of the body should allow sufficient clearance for full vertical movement of the rear wheels and axle when the vehicle travels over rough or unlevel surfaces. See Note Figure 2.7.1 Note: For recommended clearances, please refer to the Rear Axle Chart in each model’s respective section. Other Clearances The transmission control cable may be broken if it is bent by or interferes with the body and its fixtures. To prevent this, 1 inch of minimum clearance should be provided. When cable is detached from body mounting, be sure not to bend the cable.
Accessibility to the grease nipple on the rear spring bracket/shackle should be provided so that serviceability with a grease gun is not hampered. Figure 2.7.2 PAGE 2.7 Parts Minimum Clearance Location Brake Hose 6.7 in. Axle Side 1.6 in. Frame Side Parking Brake Cable 1.2 in. — Fuel Hose 1.6 in. — Shock Absorber 2.4 in. Axle Side 1.2 in. Frame Side