. OPERATION DETAILED CONTROLS AND GAUGES SUN ROOF (PC800,PC800LC,PC800SE-8 pull up cab specification machine only) WARNING Closing WINDSHIELD (PC800,PC800LC,PC800SE-8 pull up cab specification machine only) WARNING 3 - 44 machine only When standing up from the operator's seat, push lock lever (1) dow ition (L). securely to set it to LOCK pos If l ock lever (1) is at the FREE position (F) and the control lever i s touche by mistake, this may lead to a serious accident. Opening ecurely to the LOCK position (L). 1. Set the lock lever (1) s 2. Check for any ceiling (A) located on front si window grasping grip ( . Set the lock lever (1) s ecurely to the LOCK position .
Check for any ceiling window movement by pulling l ock kno de, then push up and open the ceilin B). Hold grasping grip (B), low er the ceiling window, and app ly lock ( A). If the lock cannot be app lied, open the ceiling window, then pull it in agai machine only When opening or closing the front window, bottom window, or doo LOCK position (L). always set lock lever (1) to If the control levers are no t locked and they are touched by acciden this may lead to a serious accident. When opening or closing t he window at the front of the cab , stop th machine on horizontal grou nd, lower the work equipment co mpletely t the ground, stop the engin e, then carry out the operation.
When opening the front win dow, hold the grip securely with b oth hands pull up, and do not let go u ntil the automatic lock catch is lo cked. When closing the front win dow, the window will move quicke r under it own weight. Hold the grips securely with both hands when c losing it. It i s possible to stow (pull up) the front window in the roo f of the operator's co