Power take-off Transmission Live power take-off (NMV) The entirely redeveloped live PTO is located above the clutch housing and can transfer torques of 2000 – 3000 Nm. It is available in 2 ratios (1.65 and 1.2) and is designed for continuous operation. The clutch-dependent variant is driven by the trans- mission input shaft and can only be operated while stationary; the transmission is locked in the neutral position by an interlock. The semi-clutch-dependent variant has 2 input shafts, a drive shaft for the transmission and a hollow shaft for the live PTO. It is then possible to drive with the NMV running, although it is not possible to activate the semi-clutch-dependent NMV while driving.
The power consumption of the NMV is limited to 1100 Nm when the vehicle is moving. Live power take-off (NMV) W27.45-1017-00 41 i Introduction of the New Truck Generation - The New Arocs (Model 964) – This printout will not be recorded by the update service. Status: 01 / 2013 – Overview of live PTOs Code Power take-offs N4Z NMV, clutch-dependent, MB, 1.65 N4Y NMV, clutch-dependent, MB, 1.2 N4X NMV, semi-clutch-dependent, MB, 1.65 N4W NMV, semi-clutch-dependent, MB, 1.2 Code Flange N9U PTO flange, cross geared, D=120 mm N9W PTO flange, cross geared, D=150 mm N9V PTO flange, cross geared, D=180 mm N9S PTO flange, smooth, D=150 mm Code Transmission lock N6L Live PTO transmission lock