The discharge spout. Modular design. OPTI FILL. Extremely user-friendly. High strength and a low dead weight are the key characteristics of the discharge spout. The concentrated crop stream can be directed more reliably, minimizing wasteful losses. The modular design enables the system to be rapidly adjusted to different working widths. Two extensions (M / L) allow operation up to a working width of 7.5 meters. The back of the discharge spout is entirely bolted: as a result, the top plates also function as wear plates. The OPTI FILL optimized spout control system makes management of the transfer process extremely easy.
The wide swivel angle of up to 225° allows an optimal view of the transfer process. When the discharge spout is swiveled, the end flap is adjusted automatically so that the transfer process takes place parallel to the direction of travel. Two permanently programmed spout positions simplify the swiveling process at the end of the field, e.g. when chopping up and down along one edge of a field. Furthermore, the discharge spout can be returned to its parking position automatically at the touch of a button. 48 Additional equipment, such as PROFI CAM can be retrofitted easily.