12. OPERATION 12.4 MOVING MACHINE OFF WARNING When moving off, check that the area around the machine is safe, and sound the horn before moving. Do not allow anyone in the area around the machine. There is a blind spot behind the machine, so use extreme care when reversing the machine. 1. Check that there is no warning display on the machine monitor. 2. Check that your seat belt is fastened and that dump lever 1 is at the FLOAT position. 3. Depress the brake pedal fully. Check that air pressure gauge 2 is in the green range, then set parking brake lever 3 to the TRAVEL position to release the parking brake. PARKING TRAVEL AE61743B 4.
Check that retarder pilot lamp 4 has gone out, then set shift lever 5 to the desired position. NOTICE When operating the shift lever, be sure to set it in position securely. If the lever is not placed in position properly, the shift position display on the panel may go out and the transmission warning monitor lamp may light up. Always release the accelerator pedal before shifting from to R or F. 2-68