11. EXPLANATION OF COMPONENTS B. CAUTION ITEMS (11.1.2) CAUTION If any of these monitors lights up, carry out the inspection and maintenance of the appropriate item as soon as possible. If there is an abnormality in any CAUTION item, the monitor for the location of the abnormality will light up. C. EMERGENCY STOP ITEMS (11.1.3) CAUTION If any of these monitors lights up, stop operations immediately and carry out the inspection and maintenance of the appropriate item according to the action code.
If there is an abnormality in any of the emergency stop items, the alarm buzzer will sound intermittently, the monitor for the location of the abnormality will light up or flash and the central warning lamp will flash. D.
METER DISPLAY PORTION (11.1.4) This consists of the air pressure gauge, engine water tempera- ture gauge, torque converter oil temperature gauge, retarder oil temperature gauge, speedometer, turn signal pilot lamp, service meter, engine tachometer, odometer, shift indicator (with lockup display), transmission shift lever position pilot lamp, shift limiter pilot lamp, fuel gauge, working mode display lamp (if equipped), suspension mode display lamp, preheating monitor, exhaust brake pilot lamp, rear brake pilot lamp, and differential lock-up pilot lamp (if equipped). E.
MECHATRONIC CAUTION LAMP PORTION (11.1.5) If any trouble occurred on the mechatronic devices of the control system, the appropriate monitor will flash. If these monitors flash, carry out the specified action according to the action code. F. CENTRAL WARNING LAMP If the machine is in the following condition, this lamp will flash. When an abnormality has occurred in any of B caution items. If the machine is in the following condition, this lamp will flash, and at the same time, the alarm buzzer will sound intermittently. When an abnormality has occurred in any of C emergency stop items. When E. MECHATRONIC CAUTION lamp portion flashes.
If the parking brake is applied, but the shift lever is not at neutral. When the dump lever is not at the FLOAT position and the shift lever is not at neutral. When engine tachometer red range lights up. When the machine travel speed exceeds the overrun warning speed prescribed for each transmission speed range. 2-5