11. EXPLANATION OF COMPONENTS 4. DUMP BODY ACTUATION CAUTION This lights up when the dump body control lever is at any position other than FLOAT but the body is floated. Always set the lever to the FLOAT position and lower the body during traveling. 5. TRANSMISSION FILTER CLOGGING This identifies the operator that the transmission filter is clogged. If it lights up and displays action code “01” at the same time, replace the transmission filter. 6. FUEL LEVEL This flashes when the level of the fuel in the fuel tank goes below 120 ¬ (31.68 US gal, 26.40 UK gal). If it flashes, check the fuel level and add fuel. 7.
MAINTENANCE CAUTION LAMP (If equipped) If the machine is in any of the following conditions, this lamp will light up. If it lights up and displays action code “01” at the same time, carry out check, replenishment or replacement. All the units listed below are optional.
Insufficient oil in the front brake oil tank Insufficient oil in the retarder oil tank Insufficient oil in the spring and hoist tanks Clogging of the retarder oil filter Clogging of the full flow filter (the engine oil filter) Clogging of the hydraulic oil filter Wear of the retarder brake disc (right hand) Wear of the retarder brake disc (left hand) Drop of the battery electrolyte level Insufficient oil in the engine oil pan Clogging of the air cleaner 2-9