Komatsu — 11.9 CAR RADIO

11. EXPLANATION OF COMPONENTS Antenna If the receiving wave is weak or generates noise, extend the antenna. If the wave is too strong, adjust the sensitivity by retracting the antenna. NOTICE When transporting the machine or parking it in a garape, always fully retract the antenna to avoid the possibility of breakage. 11.9.3 PRECAUTIONS FOR USE To assure safe operation, adjust the volume level so that external noise is still audible. Ensure no water is splashed over the speaker case or car radio (auto tuning) to prevent unexpected malfunction. Never use solutions such as benzine or thinners to clean the dial or buttons. These should be wiped with a dry, soft cloth.

(Use a cloth dipped in alcohol for very dirty surfaces.) At battery replacement, all the memory preset with the preset buttons will be cleared. Perform presetting again. 11.9.4 SPECIFICATIONS Tuning system : PLL synthesizer system Receiving frequency : 522 kHz to 1629 kHz (in 9 kHz steps) Actual max. sensitivity : 30 dB Actual max. output : 8 W Current consumption : 0.35 A (at 0.5 W output) External dimensions : W 184 mm x H 58 mm x D 116 mm (7.2 in x 2.3 in x 4.6 in) Weight : 0.45 kg (1 lb) 2-36