107 SEAT PLATFORM RT70M - RT90M - RT70H - RT90H RT115 - RT115T2 REF NO. PART NUMBER QTY DESCRIPTION REMARKS 1. 117-924 1 SEAT BELT SET W/5.75" TONGUE 117-925 - SEAT BELT TONGUE (5.75") 2. 117-429 1 SEAT 115-445 REPLACEMENT SEAT 3. 184-252 2 BUSHING (.562" X 1" X .590") 115-428 ADJUSTABLE TRACK 5. 106-031 2 LOCKNUT (M12-1.75, NLK) 6. 115-430 2 SEAT BELT TETHER 7. 105-267 4 CUP WASHER (5/16") 8. 309-431 1 RIGHT SEAT CONSOLE 4. 106-333 2 SCREW (M12-1.75 X 40mm, 8.8) 9. 314-594 1 SEAT BASE 10. 105-273 2 SCREW (M12-1.75 X 30mm) 11. 305-649 1 LEFT SEAT CONSOLE 13. 106-574 8 CLIP NUT (M6-1.00) 12. 107-312 32 SCREW (M6-1.00 X 25mm, BUT SOC) 14. 117-314 2 ARMREST 15.
309-294 2 LOWER ARMREST BRACKET 16. 106-159 4 FLG SCREW (1/4-NC X 3/4") 17. 105-876 2 SCREW (M10-1.50 X 35mm) 18. 105-089 4 LOCKNUT (5/16-NC) 19. 309-295 1 Z-GATE USED W/ GROUND DRIVE ON ALL MACHINES 20. 313-411 1 Y-GATE 319-158 1 Z-GATE USED W/ GROUND DRIVE ON ALL MACHINES USED WITH COMBO ATTACHMENT USED WITH PLOW ATTACHMENT 21. 106-391 2 WASHER (M12) 22. 107-001 8 FLG LK SCREW (M10-1.50 X 25mm) 316-479 1 PLOW GATE 23. 106-387 2 FLG LOCKNUT (M10-1.50) 24. 215-1107 1 SEAT SWITCH USED ON MECHANICAL UNITS ONLY 26. 313-707 2 UPPER ARMREST BRACKET 25. 310-801 1 BLANK 27. 107-702 2 CARRIAGE BOLT (3/8-NC x 3/4") 28. 107-698 2 DOWEL PIN (.375 X .500) 29. 110-383 2 KNOB (3/8-NC, BLACK) 30.
106-168 2 FLG LK BOLT (1/4-NC X 3/4") SEE FOOTNOTE 1 NOT SHOWN: FOOTNOTES: 1. USE LOCTITE 242 OR EQUIVALENT NOTE: 09 ID0036669