OPERATOR'S STATION • Washer (Overhead Window: Optional) As long as the wiper washer switch (1) is held down, washer fluid will be squirted from the nozzles on the front window and overhead window. Continue holding the wiper washer switch (1) for more than 2 seconds to automatically operate the front window wiper. Release the wiper washer switch to stop fluid from being squirted from the nozzles and to automatically stop and retract the wipers. While the wiper is operating in the INT position, when the wiper washer switch is pushed, the wiper will change to operate continuously. 1 M1U1-01-007 IMPORTANT:
The washer motor in the washer fluid tank may be damaged if washer fluid is kept squirted for more than 20 seconds or the motor is continuously operated with the washer fluid tank empty. Monitor the washer fluid squirting time and the fluid level in the washer reservoir. 2 Wiper Switch (2) (Overhead Window: Optional) Wiper switch has two positions as follows: M1U1-01-008 ON Position ...........Overhead window wiper (3) operates. OFF Position ..........Overhead window wiper (3) stops. 3 M157-01-081 1-51