OPERATOR'S STATION CIGAR LIGHTER Operation IMPORTANT: In case cigar lighter (2) does not pop out au- tomatically 30 seconds after pushing cigar lighter (2) in, pull out cigar lighter (2) manu- ally. Then, consult the your nearest Hitachi dealer. 1 1. Turn key switch (1) to the ACC or ON position. 2. Press and release lighter (2) knob. 3. Cigar lighter (2) knob will return to the original position when lighter (2) becomes usable. Pull the cigar lighter out to use. M178-01-049 4. After using cigar lighter (2), insert cigar lighter (2) into the panel until the knob is seated in the original position.
Using Cigar Lighter (2) Port as External Power Source Use cigar lighter (2) port to supply power to lighting equip- ment for servicing the machine. 2 IMPORTANT: Only 24 V electric power is available from the cigar lighter port on this machine. Never connect accessories that use power other than 24 V. Damage to the batteries and ac- cessories may result. Do not supply power to accessories for a long time without running the engine. Fail- ure to do so may discharge the batteries. Left Control Lever 1. Pull lighter (2) knob out. M1U1-01-021 2. Correctly insert the accessory socket into cigar lighter (2) port. 3. Turn key switch (1) to the ACC or ON position.
Power is supplied to the connected accessory. 4. After using the accessory, disconnect the accessory sock- et and insert cigar lighter (2) into the port. 1-55