DRIVING THE MACHINE OPERATING IN WATER OR MUD The machine can be operated in water up to the upper edge of the upper rollers only if worksite footing has sufficient strength to prevent the machine from sinking past the upper edge of the upper roller, and only if the water is flowing slowly. When operating in such conditions, check the machine’s posi- tion often. Reposition the machine if necessary. A Avoid submerging the swing bearing, swing gears and center joint. M104-05-009 If the swing bearing, swing gears and center joint are sub- merged, remove the drain plug to drain mud and water. Clean swing area. Install plug. Lubricate swing internal gear and swing bearing.
Model A mm (in) ZAXIS400R-3, 400LCH-3 930 mm (36.6 in) Swing Internal Gear Capacity ZAXIS400R-3, 400LCH-3: 19 L (5.0 US gal) Lubricate swing bearing. (See Maintenance Guide, 500 hours) 4-7