OPERATING THE MACHINE ATTACHMENT PEDAL (HYDRAULIC BREAKER) (OPTIONAL) 1 When operating a hydraulic breaker, use attachment pedal (1) located at the right-front position of the operator’s seat as illustrated to the right. Two types of attachment pedals are available, “Accelerator type” and “Common use type”. WARNING: When not required to operate the attach- ment pedal (accelerator type or common use type), place pedal lock (2) in the LOCK position. Do not place your foot on the pedal except when operating the attachment pedal (accelerator type or common use type). When operating a breaker, be sure to select the breaker mode in the work mode menu.
Failure to do so may allow the hydraulic pump to supply excess oil flow, possibly resulting in failure of the hydraulic components and/or hydraulic breaker. (Refer to the description of “Work mode” for more detailed infor- mation.) According to the type of breaker to be operated, the different breaker mode must be selected. Select the most appropriate operation mode while referring to the description of “Work mode”. M1J1-01-026 1 2 Attachment pedal (accelerator type) in the LOCK position M1J1-13-005 1 2 Attachment pedal (common use type) in the LOCK position M1J1-13-002 5-3