MAINTENANCE 5 CLEAN FUEL SOLENOID PUMP STRAINER: --- every 500 hours Fuel Solenoid Pump Cleaning When the strainer is disassembled, be sure to replace the gasket. Install the cover and the magnet only after suffi- ciently cleaning them. After being assembled, closely check the air-tightness of the strainer. Disassembling/ Assembling To remove cover (1), loosen with a spanner. After the cover is removed, gasket (2), strainer (3), and gasket (4) are easily removed in order. Wash removed strainer (3) with light oil. Install the strainer in the reverse order of disassembling. At that time, install gasket (2) into cover (1) first. Then, securely tighten cover (1) to pump (5) using a spanner.
NOTE: Wrench size: 17 mm 1 2 3 4 5 Magnet M1U1-07-074 M1GR-07-004 36 mm 2.7 mm 1 mm 3 28 mm 2 4 ш41 ш24 ш51 ш18 ш40 M1U1-07-006 7-61