MACHINE READY FOR ATTACHMENT ATTACHMENTS AND OPTIONS LONG TERM STORAGE 6 If the equipment is not to be used for a long time, do as follows. q Set the stop valve in the LOCK condition. q Install the plug and O-rings to the valves. q Set the selector valve to position (b): Position when using general attachment (crusher, etc.) q Insert the pedal lock pin in the Lock position. If there is no breaker or general attachment installed, operating the pedal may cause overheating and other prob- lems. SPECIFICATIONS 6 Hydraulic specifications q Oil flow Pedal lock pin position B mode (b): Half - (c): Free 125 l /min q Cracking pressure of service valve safety valve:
17.20 MPa (175 kgf/cmІ) 6-18 A mode E mode 100 l /min 90 l /min 200 l /min 180 l /min