Operation 3.2 Explanation of components 3. Work equipment lever b c d Use this lever (3) to operate the lift arm and bucket. NOTE Do not use the FLOAT position when lowering the bucket. Use the FLOAT position when leveling, see "Leveling opera- tion (3-87)" e a GK032327 Position (a): RAISE When the work equipment control lever is pulled further from the RAISE position, the lever is stopped in this position until the lift arm reaches the preset position of the kickout, and the lever is returned to the HOLD position. Raise Position (b): HOLD The lift arm and bucket stop and remain in the same position. Lower Position (c): LOWER GK032142 Position (d):
FLOAT The lift arm moves freely under external force. Tilt Position (e): TILT When the work equipment control lever is pulled further from the TILT position, the lever is stopped in this position until the bucket reaches the preset position of the positioner, and the lever is returned to the HOLD position. Dump Position (f): DUMP GK032144 WA150-5H – VEAM934100 3-41