4.8 Service procedure Maintenance When required Clean axle case breather When cleaning the axle breather, apply the parking brake and secure the front and rear frames with the safety bar. z A: Front z B: Rear Remove all mud and dirt from around the breather with a brush. After removing the mud or dirt from around the breather, remove the breather, immerse it in cleaning fluid and clean it. GK032251 When cleaning the breather, clean the breathers at two places (front and rear). After removing the breather, take steps to prevent dirt or dust from entering the mount.
GK032252 Clean slack adjuster When cleaning the slack adjuster, apply the parking brake and secure the front and rear frames with the safety bar. A z A: Front z B: Rear Remove all mud and dirt from around the rubber cap of the slack adjuster for the brake circuit at the axle with a brush. When cleaning the slack adjusters, clean the rubber caps at two places (front and rear). GK015028 B GK015013 WA150-5H – VEAM934100 4-31 WARNING WARNING WARNING WARNING