OM2032 03/13 Safety - Section 20 Page 20-3 Prevention Of Injury By Work Equipment Never enter or put your hand, arm or any other part of your body between movable parts such as the dump body, chassis or cylinders. If the work equipment is operated, clearances will change and may lead to serious bodily injury or death. Precautions For Attachments When installing and using optional equipment, read the instruction manual for the attachment and the information related to attachments in this manual. DO NOT use attachments that are not authorized by Komatsu America Corp., or the authorized regional Komatsu distributor.
Use of unauthorized attachments could create a safety problem and adversely affect the proper operation and useful life of the machine. Fire Extinguisher And First Aid Kit Ensure fire extinguishers are accessible and proper usage techniques are known. Any injuries, accidents, and product failures resulting from the use of unauthorized attachments will not be the responsibility of Komatsu America Corp., or the authorized regional Komatsu distributor. Periodically check fire extinguishers. Verify that they are in working condition. Know what to do in the event of a fire. Provide a first aid kit at the storage point. Keep the kit fully stocked.
Keep the phone numbers of persons you should contact in case of an emergency on hand. Precautions For ROPS The Rollover Protection Structure (ROPS) must be properly installed for machine operation. The ROPS is intended to protect the operator if the machine should roll over. It is designed not only to support the load of the machine, but also to absorb the energy of the impact. ROPS structures installed on equipment manufactured and designed by Komatsu America Corp. fulfills all of the regulations and standards for all countries.
If it is modified or repaired without authorization from Komatsu, or is damaged when the machine rolls over, the strength of the structure will be compromised and will not be able to fulfill its intended purpose. Optimum strength of the structure can only be achieved if it is repaired or modified as specified by Komatsu. When modifying or repairing the ROPS, always consult your nearest Komatsu distributor. Even with the ROPS installed, the operator must always use the seat belt when operating the machine.