12. OPERATION 12.4 MOVING MACHINE OFF 12.4.1 MOVING MACHINE FORWARD ¤ WARNING Before operating the travel levers, check the direction of the track frame. If the sprocket is at the front, the operation of the travel levers is reversed. When moving off, check that the area around the machine is safe, and sound the horn before moving. Clear all personnel from the machine and the area. Clear all obstacles from the path of the machine. If the lever is moved inside the deceleration range, engine speed will rise suddenly. Operate the levers carefully. For machines equipped with the travel alarm (option), check that the alarm works properly. AM090520 1.
Set swing lock switch 1 to the ON (actuated) position and confirm that swing lock monitor lamp 2 lights up. 2. Turn fuel control dial 3 towards the full speeed position to increase the engine speed. Full speed MAX AN113990 3. Set safety lock lever 4 in the FREE position, fold the work equipment, and raise it 40 – 50 cm (16 to 20 in) from the ground. Lock Free 40 – 50 cm (16 – 20in) AM090540 2-61