MAINTENANCE 24.9.3 CHANGE AXLE OIL WARNING The axle oil will be hot if the machine was just turned off after having been operational. Wait for the oil to cool before changing it. 1. Place a container under the oil plug (P) to catch the oil. 2. After removing the front and rear oil filler plugs (1), remove the drain plug (P) and drain the oil. 3. Clean all of the plugs. 4. Add axle oil through the plug hole (1) to the specified level. For details of the oil to use and the refill capacity, See 20 FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE on page 3-9. REMARKS For operations where the brake is used frequently, change the axle oil at shorter intervals. WA450-3MC 3-58