About the Product Console Switches Console Switches General The installed switches and their positions can change according to the specification of the machine. Each switch has a graphic symbol to show the function of the switch. Before you operate a switch, make sure that you understand its function. The rocker switches have two or three positions (as shown). If the switch has a backlight, then the graphic symbol illuminates when the ignition switch or side lights are in the on position. The light bar illuminates to show that the switch function is active. Figure 11. A 1 2 B 3 A Graphic symbol B Light bar Work Lights Two or three position rocker switch.
The switch functions operate when the ignition switch is in the on position. Position : 1 = Off Position : 2 = Boom work light on Position : 3 = Boom and cab work lights on (if installed) Beacon Two or three position rocker switch. The switch functions operate when the ignition switch is in the on and off positions. Position : 1 = Off Position : 2 = Beacon on Refer to: Beacon (Page 47). Overload Warning System Two position rocker switch. The switch functions operate when the ignition switch is in the on position. Position : 1 = Off Position : 2 = On Refer to: Overload Warning System (Page 66). 16 9821/6100-4 16