POWER STEERING 3B1-9 N3A0126E N3A0128E Installation 3. Power Steering Unit 4. Unit Fixing Nut and Bolt 1. Pitman Arm Align the setting mark (1) applied at removal. Tighten: Nut and bolt to 103 N m (10.5 kg m / 76 lb ft) 5. Universal Joint Install the parts by aligning setting marks (1) ap- plied at removal. Tighten: Universal joint bolt to M8 bolt: 25 N m (2.5 kg m / 18 lb ft) 2. Nut N3A0125E Tighten: Pitman arm nut to NHR, NKR Rigid suspension: 216 N m (22 kg m / 159 lb ft) NPR, Wishbone suspension: 294 N m (30 kg m / 217 lb ft) N3A0124E 6. Drag Link 7. Nut 8. Cotter Pin 1) Install the drag link to the pitman arm and the knuckle arm.
2) Tighten nuts to specified torque, with just enough additional torque to align cotter pin holes. Install new cotter pin.