General Information 00 M1 Maintenance Interval Operations Table: 00–10 IMPORTANT: After performing all operations in this table, perform all daily and weekly maintenance op- erations listed in the "Pretrip Inspection and Daily Maintenance" chapter of the Business Class Trucks Driver’s Manual. NOTE: Numbers in this table are maintenance opera- tion reference numbers matching those in the text of this manual. M1 Maintenance Interval Operations Maint. Oper. No. M1 Maintenance Interval Operations 00–15 Lubrication and Fluid Level Check (all but FL112, includes the following):
Clutch Release Bearing and Cross-Shaft Lubricating Hydraulic Fluid Level Checking Manual Transmission Oil Level Checking Fifth Wheel Lubricating Suspension Lubricating Knuckle Pin Lubricating Tie-Rod End Lubricating All-Wheel-Drive Front Axle Oil Level Checking Axle Lubricant Level Checking Driveline Lubricating Foot Brake Valve Actuator Lubricating, Bendix E-12 Manual Slack Adjuster Lubricating Automatic Slack Adjuster Lubricating, Meritor Automatic Slack Adjuster Lubricating, Gunite Automatic Slack Adjuster Lubricating, Haldex Drag Link Lubricating Power Steering Reservoir Fluid Level Checking Steering Gear Lubricating (Ross TAS Series) Weatherstrip, Door Hinge, and Door Latch Lubricating Business Class Trucks Maintenance Manual, February 2004 00/17