Safety WORK IN CLEAN AREA Before starting a job: • Clean work area and machine. • Make sure you have all necessary tools to do your job. • Have the right parts on hand. • Read all instructions thoroughly; do not attempt shortcuts. T6642EJ -UN-18OCT88 DX,CLEAN -19-04JUN90 REMOVE PAINT BEFORE WELDING OR HEATING Avoid potentially toxic fumes and dust. Hazardous fumes can be generated when paint is heated by welding, soldering, or using a torch. TS220 -UN-23AUG88 Do all work outside or in a well ventilated area. Dispose of paint and solvent properly. Remove paint before welding or heating: • If you sand or grind paint, avoid breathing the dust. Wear an approved respirator.
• If you use solvent or paint stripper, remove stripper with soap and water before welding. Remove solvent or paint stripper containers and other flammable material from area. Allow fumes to disperse at least 15 minutes before welding or heating. TM1475 (23OCT95) 10-05-6 F510/F525 Front Mowers DX,PAINT -19-03MAR93 131295 PN=11 WORK IN VENTILATED AREA Engine exhaust fumes can cause sickness or death. If it is necessary to run an engine in an enclosed area, remove the exhaust fumes from the area with an exhaust pipe extension. -UN-23AUG88 If you do not have an exhaust pipe extension, open the doors and get outside air into the area. TS220 DX,AIR -19-04JUN90 10 05 6