TABLE OF OIL AND COOLANT QUANTITIES TABLE OF OIL AND COOLANT QUANTITIES ASTM D975 N. 1 ASTM: America Society of Testing and Materials SAE: Society of Automotive Engineers API: American Petroleum Institute MIL: Military Specification CCMC: Common Market Constructors Committe First filling quantity: total quantity of oil, including the oil for the components and pipes. Oil change quantity: quantity of oil necessary to fill the system or unit during the normal inspection and maintenance operations. NOTE: (1) When the diesel oil sulphur content is less then 0.5%, change the engine oil according to the periodic maintenance intervals indicated in the operation and maintenance manual.
In the diesel oil sulphur content exceeds 0.5% change the engine oil according to the following table: (2) When starting the engine at temperatures below 0 °C, use engine oil SAE 10W, 20W-20 and 10W-30, even if during the day the temperature increases by 10 °C. (3) Use engine oil with CD classification; if oil with CD classification is used, reduce the engine oil change interval by a half. (4) Use original products, which have characteristics specifically formulated and approved for the engine, the hydraulic circuit of equipment and for reductions.
PC95R-2 00-13 RESERVOIR KIND OF FLUID AMBIENT TEMPERATURE CAPACITY () -- 30 -- 20 --10 0 10 20 30 40 50°C Specified Refill -- 22 -- 4 -- 14 32 50 68 86 104 122°F Crankcase sump OIL • API CD 12.5 12.5 S AE 10 W SAE 30 SAE 40 SAE 15W- 30 SAE 5 W-30 Hydraulic circuit OIL • API CD 150 74 SAE 10W SAE 5 W-30 Hydraulic circuit with biodegradable oil 150 74 Final drive (each) OIL • API GL5 0.8 0.8 SAE 85W/ 90 Swing machinery OIL • API GL5 4 4 SAE 85W/ 90 Fuel tank FUEL 125 – ✽ A STM D975 N.2 Engine coolant system PERMANENT LIQUID 18 – Sulphur content Engine oil change interval from 0.5 to 1.0% 1/2 of regular interval over 1.0% 1/4 of regular interval