GETTING TO KNOW YOUR VEHICLE 25 NOTE: To Lock The Liftgate If the vehicle is unlocked, the liftgate will open with the handle and no key fob is required. With a valid Passive Entry key fob within 5 ft (1.5 m) of the liftgate, push the Passive Entry lock button located to the right of electronic liftgate handle. The liftgate will either unlock along with the vehicle doors, or it will need to be unlocked by pushing the electronic liftgate release, depending on the selected setting in the Ucon- nect system Ъ page 159. NOTE:
When you push the button on the liftgate, either only the liftgate will unlock or all doors and the liftgate will unlock, depending on the selected setting in the Uconnect system Ъ page 159. To Lock The Vehicle’s Doors And Liftgate 2 The liftgate (and vehicle doors if unlocked) must be locked using the lock button on the key fob, the Passive Entry lock button, or the lock buttons on the interior front door panels. Push The Door Handle Button To Lock With one of the vehicle’s Passive Entry key fobs within 5 ft (1.5 m) of the driver or passenger front door handle, push the door handle lock button to lock all four doors and liftgate. NOTE:
Do NOT grab the door handle when pushing the door handle button. This could unlock the door(s). NOTE: This feature will cause the horn to chirp when the doors are locked with the door handle lock button. This feature can be turned on or off within Uconnect Settings Ъ page 159. Do NOT Grab The Door Handle When Locking 1 — Electronic Release Switch 2 — Lock Button Location Electronic Liftgate Handle