SAFETY GENERAL PRECAUTIONS WARNING: Failure to follow these safety precautions may lead to a serious accident. PROTECTION AGAINST FALLING OR FLYING OBJECTS If there is any danger of falling or flying objects hitting the opera- tor, install protective guards to protect the operator as required for each particular situation. q For work with breakers, install a front guard on the wind- shield. Also, place a laminate coating sheet over the wind- shield. q For demolition or shear work, install a front guard on the windshield and a top guard on the cab. Also, place a laminate coating sheet over the windshield.
q For work in mines, quarries, demolition, tunnels or other places where there is danger of falling rocks, put FOPS (fall- ing object protective structure) in place. Also, place a lami- nate coating sheet over the windshield. The above comments are made with regards to typical working conditions. By all means you should put on other guards if required by conditions at your particular site. For details of safety guards, please contact your Komatsu distrib- utor. Also, even for other types of work, if there is any danger of being hit by falling or flying objects or of objects entering the operator’s cab, select and install a guard that matches the working condi- tions.
(B) (C) Be sure to close the front window before commencing work. When carrying out the above operations, make sure to keep all persons other than the operator outside the range of falling or fly- ing objects. Be particularly sure to maintain a proper distance when carrying out shear operations. AB30052C PW200-7H/PW220-7H VEAM370101 25 (B): Top guard (C): Front guard