en Defrosting Defrosting 12 Defrosting 7. Remove the cover. → Page 20 8. Remove the telescopic rails. Defrosting → Page 20 12.1 Defrosting in the refri- gerator compartment 13.2 Cleaning the appliance The refrigerator compartment in your appliance defrosts automatically. WARNING Risk of electric shock! An ingress of moisture can cause an electric shock. ▶ Do not use steam- or high-pres- 12.2 Defrosting in the cool- fresh compartment The cool-fresh compartment in your appliance defrosts automatically. sure cleaners to clean the appli- ance. Liquid in the lighting or in the con- trols can be dangerous.
▶ The rinsing water must not drip Cleaning and servicing 13 Cleaning and servi- into the lighting or controls. cing ATTENTION! Unsuitable cleaning products may damage the surfaces of the appli- ance. ▶ Do not use hard scouring pads or Cleaning and servicing To keep your appliance working effi- ciently for a long time, it is important to clean and maintain it carefully. Customer Service must clean inac- cessible points. Cleaning by cus- tomer service can give rise to costs. cleaning sponges. ▶ Do not use harsh or abrasive de- tergents. ▶ Do not use cleaning products with 13.1 Preparing the appliance a high alcohol content.
If you clean fittings and accessories in the dishwasher, this may cause them to become deformed or discol- our. ▶ Never clean fittings and accessory 1. Switch off the appliance. for cleaning → Page 15 2. Disconnect the appliance from the power supply. Unplug the appliance from the mains or switch off the circuit breaker in the fuse box. 3. Take out all of the food and store it in the dishwasher. 1. Prepare the appliance for cleaning. → Page 18 2. Clean the appliance, the fittings, in a cool place. Place ice packs (if available) onto the food. 4.
If there is a layer of hoarfrost, allow the accessories, the components and the door seals with a dish cloth, lukewarm water and a little pH-neutral washing-up liquid. 3. Dry thoroughly with a soft, dry this to defrost. 5. Remove all fittings and accessor- cloth. 4. Insert the fittings and install the ap- ies from the appliance. → Page 19 6. Remove the partition. → Page 20 pliance components. 5. Electrically connect the appliance. 18