Checking the shipping pallet for damage 00 11 Installing remaining items on motorcycle • When the motorcycle arrives, check the packing material immediately for damage and, if neces- sary, examine the contents for consequential damage. • Fit the rear-view mirror. X Tightening torque: Mirror on handlebar fitting ............................ 10 Nm In case of damage in Germany 71 63 099 Mounting the Speedster fair- ing • Note the damage on the delivery slip. • Read the information sheet on damage in transit. • Notify supplier (e.g. freight company or DB) and Bavaria Wirtschaftsagentur GmbH Abteilung ZW - 12 80788 Mьnchen Tel. 089/14327-632 Fax 089/14327-709 without delay.
In case of damage in importer markets • Note the damage on the delivery slip. • Comply with specific national market proce- dures. In case of doubt, please submit enquiries to: Bavaria Wirtschaftsagentur GmbH Abteilung ZW - 12 D-80788 Mьnchen Tel. +49 89/14327-632 Fax +49 89/14327-709 • Notify the supplier (e.g. freight company) without delay. • Carefully tighten the Speedster fairing securing screws by hand. 00 11 Unpacking the motorcycle X Tightening torque: Fairing on fairing bracket................................ 2 Nm • Lever off the cover. • Take out the separate pack of items:
– Documentation – Optional Speedster fairing, if applicable – Optional seat cover, if applicable • Force off cross-struts with a suitable lever. 00 11 Inspecting motorcycle for dam- age • Check for faults. • “Express handling service” to: BMW Motorrad UX-VS-1 Fax number +49 (0)89-382-33220 • Rectify the fault. • If parts are needed, order them through the usual channel. • Costs are to be processed through the warranty claim system (stage 4). Defect codes: – Parts missing 10 01 00 00 00 – Parts damaged 10 02 00 00 00 – Incorrect parts delivered 10 03 00 00 00 e Important: Do not knock the cross-struts out or the motorcycle may be damaged. • Remove the end-walls. • Remove the side-walls.
e Important: Remove any nails projecting from the base of the packing or lying on the base or on the floor. Checking that delivery is complete • Loosen the front tensioning straps. • Loosen the rear tensioning straps. • Push the motorcycle forwards off the pallet. • Remove the set of keys from the left rear footrest. • Dispose of the packing materials in an environ- mentally responsible manner as described in Cir- cular 23/91 - Sales. – All optional extras – Toolkit – Documentation 00.16 R28000010 R28 R28 000010