2 2 1 R22340090 34 21 Removing and installing rear brake caliper X Tightening torque: Brake caliper to rear wheel drive .................. 40 Nm Brake hose to brake caliper ......................... 18 Nm Bleed screw to brake caliper.......................... 5 Nm e Attention: Do not allow brake fluid to come into contact with painted parts of the motorcycle as brake fluid de- stroys paint. • Integral ABS Drain rear wheel circuit ( a 34.17). • Disconnect brake line (1) from brake caliper. • Remove the brake caliper. e Attention: Replace the sealing rings (2) in the brake line. Do not damage the brake pads. • Installation is the reverse of the removal proce- dure. L Note:
To bleed, position the brake caliper with the bleed nipple at the highest point. • Integral ABS Fill and bleed rear wheel circuit ( a 34.26). 34.6