Troubleshooting "Power Save Mode" Continuously Appears on the Heater Panel 1 Make sure that the Cable between the Heater Panel and the Power Supply Unit is connected correctly and NOT damaged. 2 Replace the Heater Panel ⇒ Page 8-27 . 3 Replace the Power Supply Unit ⇒ Page 8-43 . 4 Replace the Main PCA ⇒ Page 8-35 . Special Power On Procedure When turning On the Printer, the Printer will follow the internal initialization process, turning on the different systems and making the necessary system checks. In order to troubleshoot the Printer the following Power On options are available: 1 Press the Cancel key and Power On button - This will allow you to skip the system check of the Printer.
2 Press the Cancel and Shift keys and Power On button - This will allow you to skip the error recovery check of the Printer. You will be given the option to enter the Maintenance Mode in order to troubleshoot the Printer by entering a password: W , X , Shift and OK . MAINTENANCE MODE PASSWORD? „ This option is useful if you want to perform the following: – Ink purging without installing media. In a normal power On situation, the Printer cannot function without the media loaded. – Recovery of a damaged NVRAM. By powering in the special power On situation, the NVRAM can be recovered by entering the Maintenance Mode and by performing the necessary steps to recover the NVRAM.
1-6 HP Designjet 9000s Series Printer Service Manual