Troubleshooting „ Side Margin Position Calibration ⇒ Page 5-27 . „ Top Margin Position Calibration ⇒ Page 5-28 . 14 In the Printhead Maintenance submenu, scroll to "Ink Charge Done" and press the OK key. # INK CHARGE DONE > NO 15 In the Ink Charge Done submenu, select "Yes" to indicate that ink charge has been completed and then press the OK key. # INK CHARGE DONE * YES 16 In the Setup submenu, scroll to "Save Calibs" and press the OK key. # SAVE CALIBS > 17 You will need to confirm that you want to save the NVRAM Calibrations by pressing the OK key. # SAVE CALIBS * OK? 18 In the Setup submenu, scroll to "Save NVRAM" and press the OK key.
# SAVE NVRAM > 19 You will need to confirm that you want to save the NVRAM contents by pressing the OK key. # SAVE NVRAM * OK? 20 Power Off the Printer, wait a few seconds and power On the Printer again. 1-8 HP Designjet 9000s Series Printer Service Manual