▶ Clean surfaces which come in contact with food before each use. Avoiding material damage en Avoiding mater ial damage Avoiding material damage 10 Perforated disc, coarse Avoiding mater ial damage ▶ Never operate the appliance for more than 10 minutes without stopping. Then switch off the appliance and allow it to cool down to room temperature. ▶ Do not operate the appliance at no-load. ▶ Do not insert objects into the filling shaft or housing, e.g. wooden spoons. ▶ Before use, check the filling shaft and housing for foreign objects.
11 Knife 12 Worm conveyor with clutch 13 Metal chamber housing 14 Perforated disc, medium 1 15 Perforated disc, fine 16 Pusher with storage compartment and lid 17 Sausage filler nozzle Familiar ising your self with your appliance Familiarising yourself with your appliance 1 Depending on the model 18 Sausage filler bearing ring Familiar ising your self with your appliance Overview After unpacking all parts, check for any damage in transit and completeness of the delivery. → Fig. 1 Rotary switch The rotary switch is used to start and stop processing and select the speed. Symbol Function Process ingredients at max- imum speed. Process ingredients at low speed. Stop processing.
Food that has got stuck can be released using the revers- ing function. → "Shredding attachment", Page 22 Reversing function The reversing function is designed to re- lease food that has got stuck by briefly run- ning the worm conveyor in reverse. → "Troubleshooting", Page 24 Note: The reversing function should only be used with the meat mincer attachment. ated discs Safety systems You can find an overview of your appli- ance's safety systems here. Overload protection The overload protection system prevents the motor and other components from be- ing damaged through being overloaded.
1 Depending on the model 21 A Main unit B Meat mincer attachment C Sausage filler attachment D Kebbe attachment1 E Cleaning brush1 F Shredding attachment1 1 Grips for transporting 2 Rotary switch 3 Holder and drive for attachments 4 Release button 5 Cover for storage compartment 6 Storage compartment for perfor- 7 Cord storage 8 Filling tray 9 Threaded ring