BYD Seal — Using Seat Belts

WARNING ● The shoulder belt should cross the center of the shoulder, far from the neck and not liable to slip from the shoulder. otherwise, it cannot function well in the event of emergency braking or accident and may even cause severe injury. 01 SAFETY 3. Insert the latch into the buckle until it clicks, and then pull it back to make sure it is firmly locked. Do not fasten the belt with any part of the strap twisted. ● The lap belt should be positioned as low as possible around the hips to avoid serious injury due to the intense lap belt forces against the abdomen in an accident. ● The seat belt should be fitted tight to the body for better protection. 6. Unlock the seat belt.

● Press the red unlock button on the buckle. The latch plate pops out, and the seat belt automatically retracts. If the seat belt does not retract smoothly and automatically, pull it out and check whether it is twisted. 4. Adjust the height of the (front) seat belts for optimum comfort and protection. ① Press the adjuster release button. ② Move the adjuster up or down to the intended position and release it. WARNING ● One seat belt is for one occupant only. Do not allow multiple occupants (including children) to share one seat belt. 5. Pull the shoulder belt firmly to check that the adjuster is locked. ● Avoid traveling with the seatback leaning too far back. The seat belt 13