→ Vehicle → Greeting . mode, and toggle Automatic Wiper off in infotainment touchscreen → Replacing Wiper Blades Replacing Wiper Blades ● Turn the knob to change the rain sensor sensitivity based on real-time rain conditions. A total of four levels are available. ● Inspect wiper blades for cracks or partial hardening at least every six months. If they are noted, replace wiper blades. Otherwise, the windshield will streak or will be left unclean after wiping. ● Up: Reduce rain sensor sensitivity. ● Down: Increase rain sensor sensitivity. ● With the ignition on, enable wiper maintenance in infotainment touchscreen → → Service → Overhaul .
When this function is enabled, the wipers rotate to the top for easy maintenance and replacement. After maintenance is complete, you can disable the function to return the wipers to the initial position. 03 CONTROLLER OPERATION 1. Pull up the wiper arm at the driver's side, and then pull up the other at the passenger's side. Front windshield wipers and washer ● To clean the front windshield, pull the wiper switch lever backward (towards the steering wheel) so that the washer sprays washing fluid while the wipers operate. 2. Press the wiper lock button. ● The washer spray will stop when the stick is released, and the wipers will operate twice then stop. 3.
Hold the wiper blade and pull it out along the indicated direction. 4. When installing a new wiper blade, follow the reverse procedure. 69