Set the light switch to and push the light switch lever down (away from the steering wheel) to turn on the high beam. CAUTION ● Once turned on, turn signals continue flashing even after the handle is released. They will turn off after the vehicle goes around the bend. Depending on the driver's habit, the turn signal will reset after the vehicle turns around under some extreme conditions. 03 CONTROLLER OPERATION Overtaking light Pull up the lever (toward the steering wheel) to turn on the overtaking light. Release the lever for the light switch to automatically reset. The overtaking light turns off. Auto light off ● Conditions to activate the auto light off function:
To activate this function, set the light switch to switch off the vehicle power. or and ● With the function is activated, the headlight, position light, rear fog light and high beam turn off in 10 seconds if the driver's door is closed. Turn signals ● Push up the lever to signal right turn. The right turn signal and its indicator on the instrument cluster flash. ● When the auto light off function is activated, the headlights, position lights, rear fog lights, and high beams turn off in 10 minutes if the driver's door is open. ● Pull down the lever to signal left turn. The left turn signal and its indicator on the instrument cluster flash.
● After the lights turn off automatically, if the light status changes, these lights come on in the new status. If the conditions to activate the auto light off function are still met, the function is activated again. ● Disabling of the auto light off function: When the vehicle is powered on, the 73