BYD Seal — General Charging Troubleshooting

REMINDER SOC, real-time temperature, service time, ambient temperature and other conditions. ● Do not close the charge port door when the port cap is fully open. ● Use charging equipment that complies with local standards. ● When the vehicle is charged with an external power supply, it is normal that the cooling fan and A/C compressor may operate automatically for the high-voltage battery to cool down. Charging Mode ● Reservation Charging (AC Only): Charge the vehicle regularly at a scheduled charging time set by the user. Charging Method The pure electric vehicle is driven by electric energy supplied from high- voltage battery.

To prevent insufficient high-voltage battery affecting the vehicle driving experience, it is very important to charge the vehicle in time and estimate the power demand before driving. REMINDER 04 ● The vehicle's power will increase while waiting for the reservation charging. It is normal for long waiting to result in a reduction of the vehicle's power and driving range. USING AND DRIVING Vehicle Charging Method: ● Immediate charging: Charging starts after the charging connector is connected. 1. Using Mode 2 Charging Cable* 2. Using AC Charging Piles* 3.

Using DC Charging Piles* ● The charging time of high-voltage varies with the charging mode, current General Charging Troubleshooting Fault Possible Cause Solution The high-voltage battery has been fully charged. When the high-voltage battery is fully charged, the charging will stop automatically. The charger is connected but charging does not start. High-voltage battery temperature is too high or too low Keep the vehicle in an environment with appropriate temperature and charge it when the temperature becomes normal. Low-voltage battery over-discharges. Replace the low-voltage battery.

If it is verified that the charging equipment's power indicator is working properly, or that there are no other unusual indications, change the charging equipment or contact the charging equipment supplier. Charging equipment fails. 83