BYD Seal — Using DC Charging Piles*

● Plug the charging connector into the port and make sure it is tight. ● Use the DC battery charger in public places to charge the vehicle. Generally, it is installed in a specific charging station. ● Charging settings: ● For AC charging pile/box subject to authentication, swipe the card or scan the QR code. For details, see the user manual for charging pile/box. ● Equipment specifications: Please check the instructions for the charger. ● Charging time: Refer to the charging time message on the instrument cluster or infotainment touchscreen. ● The charging connection indicator ● In the charging process, the instrument cluster displays relevant charging parameters and the charging sign.

lights up on the instrument cluster. 2. Charging DC charging is achieved by connecting the vehicle to a DC charging connector via its connector. ● At this point, you can schedule charging on the infotainment touchscreen. See P89 for the configuration process. ● Unlock the charge port door, then open the port door and cap. ● Connect the vehicle port: 3. Stopping charging ● End the charging: ● Plug the connector into the port, making sure it is tight. ● Charging ends automatically when early stop time is due or charging is complete. ● Operate the charging equipment to start charging.

● Press the unlock button on the smart key or press the door handle microswitch (while carrying the smart key), then the vehicle will stop charging. ● Disconnect the charge port: ● Disconnect as per the instructions in P84 . ● Close the A/C charge port cap and the port door (see P84 ). ● The charging connection indicator ● Store the charging equipment properly. lights up on the instrument cluster. ● In the charging process, the instrument cluster or infotainment touchscreen displays relevant charging parameters and the charging sign. ● If an AC charging pile/box is used, place the charging connector in its designated location in the charging pile/box. 3.

Stopping charging Using DC Chargers* ● End the charging: ● Charging ends automatically when early stop time is due or the charging is complete. 1. Equipment descriptions 88