2-1 Dashboard 43 ■ If the tire pressure malfunction indicator lamp keeps, it indicates the corresponding tire is under-inflated. In any of the above cases, it is recommended to contact BYD Auto Authorized Service Station for inspection as soon as possible. ESP fault warning indicator ■ This warning lamp turns on when the power switch is at “OK” and turns off in several seconds if the EPS system works normally. If the system is malfunctioned, this warning lamp will keep on, until the malfunction is solved. ■ When ESP fault warning indicator flashes during driving process, it indicates that ESP system is operated normally.
■ When ESP fault warning indicator is turned on (ABS fault warning indicator and parking system fault warning indicator is turned off), ESP car stability control may be faulty, but the anti-lock braking system and the brake system will still be operated normally. 2 ■ When ESP fault warning indicator is turned on (ABS fault warning indicator and parking system fault warning indicator are turned off), because the car stability control system is not operated, the car will be under very instable status during emergency turns and emergency avoidance of front obstacles.
Dashboard ■ In any of the following cases, it indicates that a component monitored with the warning indicator system is faulty, it is recommended to contact BYD Auto Authorized Service Station for inspection as soon as possible. ● When the power supply is in “OK” position, the warning indicator will not be turned on or be always on. ● The warning indicator is always on during driving process. ● During driving process, if the warning indicator flashes, it indicates that the system is operated normally. Tip ● A short flashing of the warning indicator during operation does not indicate a fault.
● If the ESP malfunction indicator lamp still keeps on while both ABS malfunction indicator lamp and parking system warning lamp turn on, it’s recommended to immediately park the vehicle in a safe place and contact a BYD Auto Authorized Service Station. In such case, the vehicle will become extremely unstable during braking and the ABS completely fails.