2-1 Dashboard 45 ● While the motor is running, this warning lamp turns on constantly if the brake fluid level is normal and the electronic parking system works normally (The electronic parking switch is pulled up and released normally and no “Please check electronic parking system.” is displayed). ● Both parking system malfunction indicator lamp and ABS malfunction indicator lamp turn on. Seatbelt not-fastening indicator This indicator lamp is functioned to remind the driver/passenger of fastening the seat belt. With power switch at “OK”, if the driver seat belt is not fastened, the seat belt reminder indicator lamp turns on. This indicator lamp keeps on until the seat belt is fastened.
2 Dashboard Low-voltage power supply system warning lamp ■ The indicator is used to indicate a charge system fault during the charge process. ■ The indicator is used to indicate a discharge system fault during the discharge process. ■ The indicator is used to indicate the operating status of DC module and battery module when the charge or discharge operation is not performed. ■ If this lamp turns on during traveling, it indicates that the DC system or battery system is malfunctioned. In such case, please turn off A/C, fan, and radio. It’s recommended to drive the vehicle to the nearest BYD Auto Authorized Service Station for repairs.
SRS fault warning indicator ■ This warning lamp turns on when the power switch is at “OK” and turns off in several seconds if the airbag system works normally. This warning lamp is functioned to monitor the airbag ECU, impact sensor, inflator, warning lamp, wiring, and power supply. ■ In any of the following cases, it indicates that a component monitored with the warning indicator system is faulty, it is recommended to contact BYD Auto Authorized Service Station for inspection as soon as possible. ● When the power supply is in “OK” position, the warning indicator will not be turned on or be always on. ● The warning indicator is turned on or flashes during driving process.
Tip ● A short flashing of the warning indicator during operation does not indicate a fault.