PROJECTING AN IMAGE FROM THE COMPUTER Connecting the Projector to the Computer Connect the projector to the computer. Connecting to Video Terminals Before connecting cables, turn off both the projector and computer. Images may be improperly projected with digital RGB signals in 1280 x 1024 or 1400 x 1050 depending on the type of computer or DVI cable. The USB terminal is used to use the remote control just like the computer mouse. Images cannot be projected simply by connecting the USB cable.
Computer To monitor output (D-sub 15-pin) To monitor output (DVI terminal) To monitor output (mini D-sub 15-pin) To monitor output (mini D-sub 15-pin) Some types of Macintosh PROJECTING AN IMAGE FROM THE COMPUTER Computer connection cable (for mini D-sub 15-pin)* Supplied computer connection cable (for DVI/mini D-sub 15-pin) Computer connection cable (for DVI)* MAC adapter (See the following memo.) * Use a cable available optionally or on the market. Some computers require adapters. If any con- nector cannot be fit in the corresponding socket, refer to the User’s Manual that came with the computer.
This terminal can be switched to the monitor output (analog RGB) terminal by selecting an option from the menu. (P69) To ensure projection of high-resolution high-quality images, use of high-performance cables is recommended. MAC Adapter (part No. LV-AD02) For the Macintosh having a D-sub 15-pin (standard) terminal for monitor output, use a MAC adapter. Set the slide switches (1-6) on the adapter depending on the Macintosh mode as shown below. 23