Errors LED status lights The status lights give the user information about the status of the printer. Until the cable pod initializes the firmware, only the ready and fatal-error light patterns can appear. If the cable pod is not connected when the printer power is turned on, the motor rotates (for about 6 seconds) but the status lights remain off (the firmware is not initialized). If the cable pod is connected while printer power is on, the printer turns off and then on, the motor rotates (for about 6 seconds) and the cable pod initializes the firmware. Ready light (green) Attention light (amber) Figure 52. LED status lights location Table 8.
LED status lights legend Q1342-90910 Errors 67 Light symbol Meaning of symbol Light off Light on Light blinking