Flatbed right cover 1 Remove one screw (callout 1). 1 Figure 79. Flatbed right cover (1 of 2) 2 Open the ADF unit. 3 Open the door on the right side of the print engine. 4 Pull out the cover (callout 2) and slide it toward the back of the MFP to remove it. Hint Look through the glass to see the tab and claws that you are disengaging. 32 Figure 80. Flatbed right cover (2 of 2) To reinstall Align and engage the top claws before completely seating the cover. 114 Chapter 6 Removal and replacement C8523-90921